Cable Display Shelves

Buy ready to use kit or make your own shelf display by choosing the required parts. For one column unit, you need 4 ceiling to floor fixings & 4 shelf supports per shelf. No more holes in the Glass. You can add and remove shelves in suspended shelf system without un screwing. Just slot in the cable and tighten the screw. This support even...

Buy ready to use kit or make your own shelf display by choosing the required parts. For one column unit, you need 4 ceiling to floor fixings & 4 shelf supports per shelf. No more holes in the Glass. You can add and remove shelves in suspended shelf system without un screwing. Just slot in the cable and tighten the screw. This support even allows you to add a new shelf between two exiting shelves without removing or even disturbing the things on top and bottom shelves. INSTALLATION OF CEILING TP FLOOR CABLES. 1) Un tight ceiling part it will split in to 2 pieces. Similarly un tight floor part it will also split in to 2 pieces. 2) Screw Brass part in to the ceiling and tight 2nd part on it so brass would be hidden under the chrome cap. 3) Suspend cable from ceiling part & pass through from the cap of the bottom part. Cut the cable to size attach the cylinder at the end of the cable by tightening the cylinder screws. 4) Lastly screw the bottom part of floor fitting into the floor and top part tight in it. Spring inside the top part of floor fixing give tension to the cable and make the cable straight & tight. 5) Install 4 cables ceiling to floor to make column & attach 4 panel supports per shelf 2 on left cable & 2 on right cable. You can add as many as you like easy shelves on above and other with shelf clamps. For custom made glass or assistance please call on 07946655177 or 02079986911.

More

Cable Display Shelves There are 4 products.

Showing 1 - 4 of 4 items
Showing 1 - 4 of 4 items