Wall To Floor Cable Gold

• The Wall-to-Floor Gold Cable Fitting is the ideal poster display solution and a smart alternative to traditional ceiling-to-floor cable systems—perfect for spaces where ceiling fixing isn’t possible.

Installation Guide:

• Unscrew the wall fitting into two parts:
• 1 × Wall Mount
• 1 × Gold Cover

Install the Wall Mount (Top):

• Fix the Wall Mount securely to the wall at the desired top position of your display.
• Screw the Gold Cover back onto the mount.
• Ensure the cable hole faces downward, with the grub screw positioned on the side.

Attach the Cable (Top):

• Take the 4m cable and thread it through the cable hole in the top fitting.
• Tighten the grub screw on the Gold Cover to secure the cable.

Prepare the Floor Fitting:

• Unscrew the floor fitting into two parts:
• 1 × Floor Mount
• 1 × Gold Floor Cap (with spring and cable mechanism)

Install the Floor Mount:

• Position and fix the Floor Mount directly below the wall fitting.
• Use the hanging cable as a guide to ensure correct alignment.

Adjust the Cable Length:

• Unscrew and remove the cable from the Gold Floor Cap by detaching the brass cylinder.
• Cut the cable to the required length (leave a little extra for adjustment if needed).

Reassemble the Floor Cap:

• Thread the cable back through the Gold Floor Cap, then through the spring.
• Reattach the brass cylinder to the end of the cable to secure it.

Secure the Floor Fitting:

• Pull the cable taut.
• Screw the Gold Floor Cap back onto the Floor Mount while maintaining tension.