Wall to Wall Cable Red

• Cable Display Wall to Wall Fixing With 3 Meter adjustable cable.
• Easy To install and a discreet hanging solution for window displays retail, education, office wire displays.
• With this our simple design you don't need tensioner just attach the cable to top wall support by tightening the side screw.

Installation Guide:

• Unscrew each wall fitting into two parts:
• 1 × Wall Mount
• 1 × Red Cover

Install the Top Fitting:

• Fix the Wall Mount securely to the wall at the desired top position of your display.
• Red Screw the Red Cover back onto the mount.
• Ensure the cable hole faces downward, with the grub screw positioned on the side.

Install the Bottom Fitting:

• Measure and align the position for the bottom of your display.
• Secure the second Wall Mount to the wall.
• Attach the Red Cover, ensuring the cable hole faces upward, with the grub screw on the side.

Attach the Cable (Top):

• Thread the cable through the top fitting’s cable hole.
• Tighten the grub screw to secure the cable in place.

Attach the Cable (Bottom):

• Thread the cable through the bottom fitting’s cable hole.
• Pull the cable taut and tighten the grub screw.
• Cut any excess cable protruding from the bottom fitting for a clean, neat finish