Round Glass Shelves Ceiling to Floor Kit

• Buy ready to use complete shelves with kit or make your own hanging shelf display by choosing the required parts.
• Per shelf you need 3 ceiling to floor fixings & 3 glass shelf supports.
• No more holes in the Glass. You can add and remove shelves in suspended shelf system without un screwing. Just slot in the cable and tighten the screw.
• This support even allows you to add a new shelf between two exiting shelves without removing or even disturbing the things on top and bottom shelves.
• Available glass sizes are 30cm, 40cm & 50cm. (Custom sizes are available on request)
• Different colours of glass shelves are available, Clear, Frosted, Black. (Custom colours are available on request)

How to Install:

• Un tight ceiling part it will split in to 2 pieces. Similarly un tight floor part it will also split in to 2 pieces.
• Screw Brass part in to the ceiling and tight 2nd part on it so brass would be hidden under the chrome cap.
• Suspend cable from ceiling part & pass through from the cap of the bottom part. Cut the cable to size attach the anchor part at the end of the cable by tightening with screws.
• Lastly screw the bottom part of floor fitting into the floor and top part tight in it. Spring inside the top part of floor fixing give tension to the cable and make the cable straight & tight.
• Install 4 cables ceiling to floor to make column & attach 4 panel supports per shelf. You can add as many as you like easy shelves on above and other with shelf clamps.

Kit Includes:

• 1 Shelf:     1 x Round glass + 3x Ceiling-to-floor (4m steel cable which you can cut to size) + 3 x Glass shelf support
• 2 Shelves: 2 x Round glass + 3x Ceiling-to-floor (4m steel cable which you can cut to size) +  6 x Glass shelf support 
• 3 Shelves: 3 x Round glass + 3 x Ceiling-to-floor (4m steel cable which you can cut to size) + 9 x Glass shelf support 
• 4 Shelves: 4 x Round glass + 3 x Ceiling-to-floor (4m steel cable which you can cut to size) + 12 x Glass shelf support