Double Sided Saloon Shelf Display A2

ceiling to floor glass shelf with acrylic pocket in the middle to create 2 sided shelf with 2 posters. Ideal for an electronic device, shoe wear or accesories display. The kit consists of 1 glass shelf 45x60cm or 45x30cm depends on selection, 1 acrylic pocket A2, 4 ceiling to floor steel cables, 2 Ceiling cables and with all fittings.

Easy installation following these steps

1) Mark on the Ceiling where your fitting will be.
2) Measure according distance to second fitting and using LEVEL TOOL alight both for best straightness and mark the second mark. 
3) Using a drill machine drill a hole where you marked your fittings to be, and then insert wall plugs. make sure wall plugs fully inserted and are flush with the wall. 
4) Unscrew grub screw at the bottom of the support, support will split into 2 pieces. Brass part + chrome support.
5) Take small brass part and screw it into the wall with screw & plug. (repeat this for second fitting)
6) Slot in the support on to the brass part already screwed in to the wall. The brass part will completely go inside the support & hidden. Next, you tighten the side grub screw, so support will not come off from the brass part. ( repeat this for second fitting).
7) mark on the floor where fittings will be. Measure according distance to second fitting and using LEVEL TOOL alight both for best straightness and mark the second mark. 
8) Unscrew bottom fitting so it would split in two. screw bottom part into the floor with screw and wall plug and tighten another part on it.
9)Lastly, attach Glass shelf with cable with the help of shelf support. You need 4 supports per pocket and acrylic pocket with acrylic pocket supports