No products
Wall To Wall Rod Display Fittings
WWRD-F
New product
- Wall to wall display fittings for 6mm thick round rod but can take up to 12MM thick rod of any shape square. Rod is not included in this set. You need two sets to make on e column. You can cut the rod to size to use with these fittings. Next-day delivery available, Price from £10.99/
994 Items
- Write a review
More info
- Ideal to display acrylic pocket, MDF, Dibond, Perspex acrylic, Foamex, Plywood, Many other sheet materials. Size 30MM length x 15MM Diameter.
Easy installation following these steps:
1) Mark on the wall where your fitting will be.
2) Measure according distance to second fitting and using LEVEL TOOL alight both for best straightness and mark the second mark
3) Using drill machine drill a hole where you marked your fittings to be, and then insert wall plugs. make sure wall plugs fully inserted and are flush with the wall.
4) Unscrew grub screw at the bottom of support with Alan key & support will split in to 2 pieces. Brass part + chrome support.
5) Take small brass part and screw it into the wall with screw & plug. (repeat this for second fitting)
5) Slot in the support on to the brass part already screwed in to the wall. Brass part will completely go inside the support & hidden. Lastly you tighten the side grub screw with allen-key so support will not come off from brass part. ( repeat this for second fitting)