Shop Rod Display Shelf & Mirror Kit

High Quality Fittings made with Brass & polish chrome. These magic fittings help you create any type of display. Rod displays ceiling to floor ideal for shops to display glasses, watches, hats and scarfs.

for agent displays education sector office displays retail and shop display, window hanging glass shelf system. Easy installation following these steps:

1) Mark on the Ceiling where your fitting will be.

2) Measure according distance to second fitting and using LEVEL TOOL alight both for best straightness and mark the second mark. 

3) Using a drill machine drill a hole where you marked your fittings to be, and then insert wall plugs. make sure wall plugs fully inserted and are flush with the wall. 

4) Unscrew grub screw at the bottom of support with Alan key & support will split into 2 pieces. Brass part + chrome support.

5) Take small brass part and screw it into the wall with screw & plug. (repeat this for second fitting)

6) Slot in the support on to the brass part already screwed in to the wall. Brass part will completely go inside the support & hidden. Next you tighten the side grub screw with allen key so support will not come off from the brass part. ( repeat this for second fitting).

7) Slot in the 6mm rod & tighten the front screw. You can cut the rod to size.

6) Lastly attach Acrylic pockets with rods with the help of panel support . You need 4 supports per pocket.

Each kit comes with 4 rods 6mm thick X1.5m you screw 2 rods of 1.5m  together to make 3 meter long  IF YOU NEED RODS LONGER THAN 3 METER THEN BY EXTRA RODS & SCREW TOGETHER EACH ROD HAS MALE & FEMALE THREAD) , 2 sets of ceiling & floor FITTINGS and Glass shelf & mirror supports.